[1] 2016.09-2022.06 北京科技大学 博士研究生

[2] 2012.09-2016.06 北京科技大学 本科

[1] 2022.09-2024.12 北京科技大学 冶金与生态工程学院

[2] 2025.01-至今 南昌大学 物理与材料学院

高强钢粉末水雾化与热处理装置及工艺研发与应用

氯化法钛白粉氧化工段流场模拟及工艺优化研究

非晶带冶炼炉吹氩工艺优化研究

一种基于破碎模式预测的雾化生产顺行控制方法

非晶带喷包结构与优化研究

还蒸炉装置结构与生产工艺优化研究

连铸坯表层物相行为控制技术

大规格立式连铸圆坯偏析控制

放电等离子液相烧结制备铁基非晶磁粉芯及其性能调控

板坯连铸电磁搅拌工艺优化研究

铁基球形非晶磁粉气水联合雾化工艺优化研究

Fe基超细粉水、气雾化工艺及装置研发

平流铸造熔潭、薄带成型及冷却优化研究

代表性学术论文（中科院二区及以上论文）

[1]      Wang P, Liu J, Zhang J, et. al. Improvement of bottom-blown regime in the planar flow casting process for preparing Fe-based amorphous ribbons: Numerical simulation and industrial application. Journal of Materials Research and Technology, 2026, 42: 2297-2309. SCI索引号：WOS:001735047000001.

[2]      Wang P, Tian C, Zhang J, et. al. Optimization of Water Nozzles for Gas-Water Combined

Atomization：Study on Water Film Characteristics. Physics of Fluids, 2026, 38(3): 033310. SCI索引号：WOS:001705428900001.

[4]      Wang P, Feng W, Zhang J, et. al. Structural optimization of single-strand crucible for planar flow casting: simulation and application study. Physics of Fluids, 2025, 37: 063318. SCI索引号：WOS:001508417500022.

[5]      Wang P, Liu J, Zhang J, et. al. Investigation on close-coupled gas atomization for Fe-based amorphous powder production via simulation and industrial trials: Part II. Particle flight and cooling during secondary atomization. Journal of Materials Research and Technology, 2023, 26: 9480-9498. SCI索引号：WOS:001088957200001.

[6]      Wang P, Liu J, Zhang J, et. al. Breakup process modeling and production of FeSiAl magnetic powders by close-coupled gas atomization. Journal of Materials Research and Technology, 2023, 23: 730-743. SCI索引号：WOS:000963306100001.

[7]      Wang P, Zhu Z, Zhang J, et. al. Industrial-scale fabrication of FeSiBC cores with balanced soft magnetic properties by transverse magnetic field annealing and mixing of carbonyl iron powder. Journal of Alloys and Compounds, 2024, 977: 173381. SCI索引号：WOS:001152648200001.

[8]      Wang P, Zhu Z, Zhang J, et. al. Industrial-scale fabrication of FeSiCr magnetic powder cores with high magnetic permeability and low loss. Journal of Alloys and Compounds, 2023, 962: 171095. SCI索引号：WOS:001029225900001.

[9]      Wang P, Liu J, Zhang J, et. al. Industrial-scale fabrication of amorphous magnetic powder cores with excellent high-frequency magnetic properties: Optimization for kinds and content of insulating agents. Journal of Non-Crystalline Solids, 2023, 605: 122082. SCI索引号：WOS:000898861700002.

[10]   Wang P, Wei M, Zhang J, et. al. Crystallization evolution behavior of amorphous Fe85.7Si7.9B3.6Cr2C0.8 powder produced by a novel atomization process. Journal of Non-Crystalline Solids, 2022, 594: 121824. SCI索引号：WOS:000843557200003.

[11]   Wang P, Wu J, Wang H, et. al. Mechanistic Insights into Surface Structure Control for Improving Hot Ductility in Continuous Casting. Metallurgical and Materials Transactions B, 2026, 57(7):3587-3603. SCI索引号：WOS:001748623800001.

[12]   Wang P, Tang H, Zhang J, et. al. Improved In-Mold Metallurgical Behavior for Slab Casting of IF Steels by a Novel Multi-Poles Electromagnetic Stirring. Metallurgical and Materials Transactions B, 2022, 53: 1691-1702. SCI索引号：WOS:000765192600003.

[13]   Wang P, Tang H, Zhang J, et. al. Influence of Dual-Channel Induction Heating Coil Parameters on the Magnetic Field and Macroscopic Transport Behavior in T-Type Tundish. Metallurgical and Materials Transactions B, 2021, 52(5): 3447-3467. SCI索引号：WOS:000673032400001.

[14]   Wang P, Cheng L, Zhang J, et. al. Propagation form of internal cracks induced by continuous casting soft reduction and control strategy for internal quality. Journal of Iron and Steel Research International, 2024, 31: 622-623. SCI索引号：WOS:001148648800001.

[15]   Wang P, Xiao H, Zhang J, et. al. Effect of channel diameter on magneto-thermal conversion ratio and consistency of each strand in a multi-strand induction heating tundish. Journal of Iron and Steel Research International, 2023, 30: 1199-1210. SCI索引号：WOS:000948887800002.

[16]   Chen X, Wang P*, Xiao H, et. al. Dual optimization of the geometric design and inductor parameters of the induction heating tundish based on numerical simulations. Journal of Materials Research and Technology, 2023, 24: 1410-1428. SCI索引号：WOS:000965282700001.

[17]   Chen X, Wang P*, Zhang J, et. al. New electromagnetic variable flow device for slab continuous casting mold: mechanical design and magnetic field analysis. Journal of Iron and Steel Research International, 2024, 31:2710-2726. SCI索引号：WOS:001250354300002.

[18]   Chen X, Wang P*, Zhang J, et. al. Evaluation of the Adaptability of the Dual-Port Channel in Induction Heating Tundish. Metallurgical and Materials Transactions B, 2025, 56(3):2437-2452. SCI索引号：WOS:001440774500001.

[19]   Liu J, Li B, Wang P*, et al. Optimization of the gas system for gas–water combined atomization technique in FeSiBC amorphous powder production. Physics of Fluids, 2024, 36: 073317. SCI索引号：WOS:001281674800006.

[20]   Liu J, Wang P*, Zhang J, et al. Investigation on close-coupled gas atomization for Fe-based amorphous powder production via simulation and industrial trials: Part I. Melt breakup behaviors during primary atomization. Journal of Materials Research and Technology, 2023, 27: 6568-6580. SCI索引号：WOS:001122832700001.

[21]   Liu J, Wang P*, Zhang J, et al. FeSiBCCr bulk metallic glasses with excellent soft magnetic properties prepared using spark plasma sintering technology. Journal of Non-Crystalline Solids. 2024, 645: 123205. SCI索引号：WOS:001317054400001.

[22]   Liu J, Gao Y, Wang P*, et al. Structure evolution and magnetization properties of FeSiBCCr amorphous alloys prepared by spark plasma sintering. Journal of Non-Crystalline Solids, 2023, 622: 122651. SCI索引号：WOS:001088738300001.

[23]   Liu J, Dong Y, Wang P*, et. al. Improved high-frequency magnetic properties of FeSiBCCr amorphous soft magnetic composites by adding carbonyl iron powders. Journal of Non-Crystalline Solids, 2023, 605:122166. SCI索引号：WOS:000968235900001.

[24]   Liu J, Zhu Z, Wang P*, et al. Effects of two silicone resin coatings on performance of FeSiAl magnetic powder cores. Journal of Iron and Steel Research International, 2024, 31(5): 1279-1288. SCI索引号：WOS:001072769000002.

[25]   Liu J, Dong Y, Wang P*, et. al. Simulation and experiment study on the fabrication of Fe-based amorphous powders by a novel atomization process equipped with assisted gas nozzles. Journal of Iron and Steel Research International, 2023, 30(6): 1142-1155. SCI索引号：WOS:000860418900001.

[26]   Zhu Z, Wang P*, Zhang J, et. al. Synergistic regulation mechanism and effects of sol-gel and phosphoric acid passivation composite insulation coatings on FeSiBC amorphous soft magnetic composites. Journal of Non-Crystalline Solids, 2026, 678: 123988. SCI索引号：WOS:001681369700001.

[27]   Zhu Z, Wang P*, Zhang J, et. al. Effect of resin types on magnetic properties and mechanical strength of FeSiBC amorphous magnetic powder cores. Journal of Iron and Steel Research International, 2025, 32(10): 3655-3643. SCI索引号：WOS:001512257500001.

[29]   Zhu Z, Wang P*, Zhang J, et. al. Improving the magnetic properties of FeSiBC soft magnetic composites by flake powder orientation and mixing with FeSiBCCr fine powder. Journal of Materials Research and Technology, 2024, 33: 8519-8529. SCI索引号：WOS:001366627000001.

[30]   Zhu Z, Wang P*, Zhang J. Preparation of FeSiBC soft magnetic composites with excellent magnetic properties and environmental reliability based on mechanofusion method. Journal of Materials Research and Technology, 2025, 36: 4112-4124. SCI索引号：WOS:001473676100001.

[31]   Geng H, Chang Y, Wang P*, et al. Insight into effect of forced convection during slab casting on as-cast solidification structure. Journal of Iron and Steel Research International, 2025, 32(6): 1568-1583. SCI索引号：WOS:001357680900001.

[32]   Wang H, Wang P*, Zhang J, et al. Controlling segregation and hardenability of gear steel based on as-cast structure. Journal of Iron and Steel Research International, 2025, 32(1): 144-158. SCI索引号：WOS:001394844200001.

[33]   Wang H, Wang P*, Zhang J, et al. Soft reduction control investigation of spot segregation in continuous casting bloom for 42CrMoA crankshaft steel. Journal of Iron and Steel Research International, 2025: 32(3): 695-706. SCI索引号：WOS:001286392500001.

[34]   Wang H, Wang P*, Zhang J, et al. Improvement of Macro/Semi-macrosegregation and Mechanical Properties of Gear Steel Casting-Rolling Based on the Continuous Casting Full Process. Metallurgical and Materials Transactions B, 2025, 56(3): 3171-3186. SCI索引号：WOS:001466311200001.

[35]   Wang H, Zhang Z, Wang P*, et al. Improving the as-cast structure and semi-macro segregation in bearing steel through cerium inclusions. Journal of Materials Research and Technology, 2025, 39: 7575-7587. SCI索引号：WOS:001621164600001.

[36]   Chen L, Wang P*, Zhang J, et al. Control of the centerline segregation by manipulating dendritic growth for slab casting of HSLA steel through roller-type electromagnetic stirring. Journal of Manufacturing Processes, 2026, 160: 142-157. SCI索引号：WOS:001675356000001.

[37]   Li Y, Wang P*, Zhang J, et al. Flow characteristics of nozzles for high-pressure water atomization of FeSiCr soft magnetic powders. Journal of Iron and Steel Research International, 2026, 33(7): 210. SCI索引号：WOS:001796408000001.

[38]   Xia S, Gao Y, Wang P*, et al. Influence Mechanism of Vertical Electromagnetic Stirring on Centerline and A-Type Segregation in Ingots Based on a Three-Phase Solidification Model. Metallurgical and Materials Transactions B, 2026, 57(8): 4404-4421. SCI索引号：WOS:001776308500001.

[39]   Xu J, Sun H, Wang P*, et al. Soft magnetic properties of nano-SiO2 coated Fe-based amorphous soft magnetic composites with high density fabricated by hot pressing. Ceramics International, 2026, 52(12):20158-20168. SCI索引号：WOS:001752379200001.

授权发明专利情况（第一发明人、发明专利）

1、王璞, 张家泉, 刘佳奇, 等. 一种基于破碎模式预测的雾化生产顺行控制方法. CN 116644688 B.

2、王璞, 董延楠, 张家泉, 等. 一种超薄金属材料金相样品的制备方法. CN 117030410 B.

3、王璞, 高原, 张家泉, 等. 一种 Fe-Si-B 基大块非晶合金制备方法及材料. CN 116904831 B.

4、王璞, 董延楠, 张家泉, 等. 一种雾化非晶粉末收得率计算方法及应用. CN 116992794 B.

5、王璞, 张家泉, 朱争取, 等. 一种电感用高性能合金磁体及制备方法. CN 117174424 B.

6、王璞, 张家泉, 陈亮, 等. 一种连铸轻压下裂纹位置的数值模拟验证方法及内部质量控制方法. CN 116738518 B.

7、王璞, 张家泉, 王海杰, 等. 改善高碳低合金钢宏观和半宏观偏析的压下控制方法. CN 117226059 B.

8、王璞, 张家泉, 王海杰, 等. 用于改善棒材带状缺陷和力学性能的方法及凸轮轴. CN 117548638 B.

9、王璞, 张家泉, 刘佳奇, 等. 一种快速反应调节熔体流量的控制装置、控制方法及其应用. CN 115509266 B.

10、王璞, 张家泉, 陈希青, 等. 一种钢连铸感应加热中间包及其控制方法. CN 116833399 B.

11、王璞, 张家泉, 朱争取, 等. 一种铁基非晶复合磁粉芯及制备方法. CN 119889910 B.

12、王璞, 张家泉, 董延楠, 等. 一种热塑性预测模型、方法、电子设备或存储介质. CN 119864112 B.

13、王璞, 张家泉, 王海杰, 等. 一种用于改善齿轮钢棒材淬透性的方法及齿轮钢棒材. CN 119187485 B.

14、王璞, 田晟, 刘佳奇, 等. 一种用于非晶材料凝固潜热的测定方法及电子设备. CN 121612919 B.

15、王璞, 张家泉, 陈希青, 等. 一种通道式加热及减速中间包装置及控制方法. CN 116493583 B.